58
Connections for a Linear Editing System
Chapt
er 5 Conne
c
tio
ns
a
nd Set
tings
f
o
r Edit
ing
Connections for a Linear Editing System
When using this unit as the recorder for editing in
DVCAM format:
• It is not possible to carry edit audio channels separately.
However, if all audio channels are selected, insert
editing is possible.
• For the audio edit points, you can select a cut or fade-in/
fade-out by menu selection.
• For linear editing using an i.LINK input, if controlled
through the RS-422A interface, the edit points are offset.
Use i.LINK for the control too.
When using this unit as the player for playback in HDV
format:
When using this unit as an HD linear editing player, this
unit does not support synchronization. Either turn the
controller’s player synchronization function off, or set it to
“Preroll & Play.”
A tape recorded in HDV format cannot be edited with this
unit when using this unit as the recorder in an editing
system.
Editing in DVCAM Format Using an External Controller
Using an RM-280
The following figure shows an example of the connections
for a DVCAM format linear editing system connected to
an RM-280 editing controller, with a DSR-1500A/1500AP
as the player, and this unit as the recorder.
Notes
Note
