65
Digital Dubbing
Cha
p
te
r 6
Us
in
g
th
e
i.
LI
NK Conn
ec
to
r f
o
r Dub
b
ing an
d
T
C
I
n
s
e
rt
Digitally Dubbing Signals in HDV/
DVCAM/DV Format
• The maximum recording time differs depending on the
recording format even if using a tape with the same
maximum recording/playback time
. To
carry out dubbing, set the recording format to the format
output from the player, or use a tape with longer
maximum recording/playback time for recording.
• In the case of a recorded tape including a combination of
HDV format and DVCAM/DV format, select one format
and dub the tape. The recording sections in the format
not selected are recorded as a blank signal.
• In the case of a recorded tape including a combination of
DV (SP) format and DVCAM format, the tape can be
dubbed with the mixed formats, but where the format
changes, the switch may not be the same as on the
original tape.
• It is not possible to dub signals recorded in DV (LP)
format.
• If the source tape begins with a section in which no
signals are recorded, the corresponding no-signal section
created at the beginning of the tape recorded on this unit
may have a different length depending on the digital
format of the source tape, the recording format selected
on this unit, etc. During dubbing, if the digital format of
the source tape changes, no signals are recorded until the
initial digital format is restored. No signals are recorded
also when the digital format used on the player is DV
(LP).
• Regardless of the audio recording mode setting of this
unit, dubbing is performed with the original audio
recording mode unchanged (2-channel/48 kHz mode or
4-channel/32 kHz mode).
• Approximately the last 2 minutes of the tape may not be
copied because of differences in tape lengths. (If an
index picture is recorded in this portion, it may also not
be copied.)
• A continuous recorded section of approximately 5
seconds is required before the recording start point. It is
recommended to record beforehand color bars or a
similar signal at the start point of the source tape to be
dubbed on this unit.
Use the following procedure for digital dubbing.
1
Press the MENU button.
2
Press the
M
or
m
button to select AUTO FUNCTION.
3
Press the
,
/
B
button.
This displays the items on level 1 of the AUTO
FUNCTION (auto mode execution menu).
4
Press the
M
or
m
button to select the format for
dubbing.
This description assumes that i.LINK
DUBBING:HDV is selected, by way of example.
5
Press the
,
/
B
button to display the menu level 2 for
the item i.LINLK DUBBING:HDV, and select the
data to bedubbed with the
m
button.
Notes
A
B
MENU
RESET(NO)
SET(YES)
TC
PRESET
ASSIGN
1,7,10
8
3,5,6
2,5
Setup menu
S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
Time counter display
Auto func
S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
Time counter display
i.LINK DUB
AUTO FUNCTION MENU
i.LINK DUBBING :HDV
i.LINK DUBBING :DV/DVCAM
TC INSERT :DVCAM
Monitor screen
Time counter display
