101
Specifications
A
ppe
ndix
Band width (625/50)
Composite/S-video:
25 Hz to 4.8 MHz ±1.0 dB (Y)
Component :
25 Hz to 5.0 MHz ±1.0 dB (Y)
25 Hz to 2.0 MHz +1.0/
−
2.0 dB (R
−
Y/B
−
Y)
S/N
Composite/S-video I/O (Y):
52 dB or more
Component I/O (Y): 54.5 dB or more
Y/C delay
30 ns or less
K-factor
2.0% or less (K2T, KPB)
Processor adjustment range
Video level
1)
±3
dB/
−∞
to 3 dB selectable
Chroma level
1)
±3 dB/
−∞
to 3 dB selectable
Setup/Black level
1)
±30 IRE (±210 mV)
Chroma phase
1)
±30°
System phase
1)
Sync: ±1
μ
s
SC: ±180°
1) Adjust with menu settings.
Audio performance
Frequency response
Two-channel (48 kHz) mode:
20 Hz to 20 kHz ±1.0 dB
Four-channel (32 kHz) mode:
20 Hz to 14.5 kHz ±1.0 dB
Dynamic range More than 87 dB
Distortion (THD + N)
Less than 0.07% (48 kHz)
Input connectors
Digital signal inputs
SDI IN
BNC type (×1), Serial digital (270 Mbps),
SMPTE 259M/ITU-R BT.656
AUDIO (AES/EBU) IN
BNC type (×2), complying with AES-
3id-1995
HDV/DV
6-pin IEEE 1394 connector (×1)
Analog video inputs
REF. VIDEO IN
BNC type (×2, loop-through with 75
Ω
automatic terminator)
Black burst or Composite sync
0.286 Vp-p (525/60) or 0.3Vp-p (625/
50), 75
Ω
, negative sync or HD bipolar
tri-level sync
0.3Vp-p, 75
Ω
, negative sync
VIDEO IN (optional HVBK-1505 Analog Input Board
required)
BNC type (×3 and 1 loop-through
connector with 75
Ω
automatic
terminator), composite/component
(SD)/S-video switchable
Composite Y/S
−
Y/CPST and 1 loop-through
connector with 75
Ω
automatic
terminator: 1.0 Vp-p, 75
Ω
, negative
sync
Component (SD)
Y/S
−
Y/CPST: 1.0 Vp-p, 75
Ω
, negative
sync
R
−
Y/S
−
C and B-Y: 0.7 Vp-p (75% color
bars for 525/59.94 or 100% color bars
for 625/50), 75
Ω
S-video
Y/S
−
Y/CPST: 1.0 Vp-p, 75
Ω
, negative
sync
R
−
Y/S
−
C: 0.286 Vp-p (525/59.94) or
0.3 Vp-p (625/50), 75
Ω
(burst level)
Analog audio inputs
AUDIO IN (optional HVBK-1505 Analog Input Board
required)
XLR 3-pin, female (×2), +4/0/
−
3
1)
/
−
6 dBm, high impedance, balanced
1) For 625/50 only
Timecode input
TC IN
BNC type, SMPTE timecode (525/59.94)
or EBU timecode (625/50), 0.5 Vp-p
to 18 Vp-p, 3.3 k
Ω
, unbalanced
Output connectors
Digital signal outputs
SDI OUT
BNC type (×2)
Serial digital (270 Mbps), SMPTE 259M/
ITU-R BT.656
HD-SDI OUT
BNC type (×2)
Serial digital (1.485, 1.485/1.001 Gbps),
SMPTE 292M
AUDIO (AES/EBU) OUT
BNC type (×2), complying with AES-
3id-1995
HDV/DV
6-pin IEEE 1394 connector
Analog video outputs
VIDEO OUT
BNC type (×3), coS-video/
component (SD)/component (HD)
switchable
Composite
Y/CPST: 1.0 Vp-p, 75
Ω
, negative sync
Component (SD)
Y/CPST: 1.0 Vp-p, 75
Ω
, negative sync
Pr/R–Y/S–C and Pb/B–Y/S–Y:
0.7 Vp-p (75% color bars for 525/
59.94 or 100% color bars for 625/50),
75
Ω
Component (HD)
Y/CPST: 1.0Vp-p, 75
Ω
, negative sync
Pr/R–Y/S–C and Pb/B–Y/S–Y: 0.7Vp-p,
75
Ω
