73
Menu Contents
Chap
te
r 7
Men
u
s
Menu Contents
Setup Menu
The purpose and settings of the setup menu items are
described below.
Indications of menu items and settings
In the table below entitled “Menu contents”, the indication
of each menu item or setting on the monitor screen is
shown first, then the indication of the same item or setting
in the time counter display of this unit is shown in square
brackets ([ ]).
Examples:
• Settings preceded by an asterisk (such as *EE) are
factory default settings.
• In the time counter display, one to three “>” symbols
may precede item or setting indications depending on the
current menu level. Larger numbers of “>” symbols
indicate lower menu levels.
Menu contents
Indication on monitor
screen
Indication in time counter
display
OPERATIONAL FUNCTION [Operational]
CASSETTE OUT
[>> Cass. out]
*
EE [>>>
EE]
OPERATIONAL FUNCTION [Operational]: Operation
settings
Description of settings
REPEAT FUNCTION [> REP
FUNC]:
Make settings for
repeat playback mode.
REPEAT MODE [>>
REPEAT MD]:
Determine
whether or not to put the
unit into repeat playback
mode.
*
OFF [>>> OFF]:
Do not put the unit into repeat playback
mode.
ON [>>> ON]:
Put the unit into repeat playback mode.
ON (FREEZE) [>>> FREEZE]:
Put the unit into freeze playback
mode. (In this case, while the unit is cueing up to the
repeat start point, the freeze picture of the repeat end point
is displayed.)
REPEAT TOP [>> REP
TOP]:
Determine
whether the repeat start
point is the beginning of
tape or point A.
*
TAPE TOP [>>> Tape top]:
The repeat start point is the
beginning of tape.
A POINT [>>> A point]:
The repeat start point is point A as set
by the user.
REPEAT END [>> REP
END]:
Determine
whether the repeat end
point is the end of the
video recorded portion,
the end of tape or point
B.
*
VIDEO END [>>> VD end]:
The repeat end point is the end of
the video recorded portion.
TAPE END [>>> Tape end]:
The repeat end point is the end of
tape.
B POINT [>>> B point]:
The repeat end point is point B as set
by the user.
A PRESET [>> A preset]:
Specify a timecode value
to be used as the setting
of point A.
For details, see “Setting Points A and B for Repeat Playback”
(page 47).
B PRESET [>> B preset]:
Specify a timecode value
to be used as the setting
of point B.
For details, see “Setting Points A and B for Repeat Playback”
(page 47).
