1-1(E)
FDDR-7000 IM
Section 1
Installation
1-1. Operating Environment
w
Avoid placing or using this unit where it will be exposed to
greasy fumes, steam, dampness and dust environments.
If placing or using this unit in these environments, it may
cause a fire and an electric shock.
n
1.
Do not install these units near heat sources.
2.
To prevent a temperature rise inside the unit, pay
careful attention to circulation of air in the place where
the unit is installed.
Do not block the ventilation holes on the outer cabinet.
3.
Do not install the unit in the following places:
.
Where it is subject to direct sun light or strong light.
.
Places subject to severe vibration or much dust.
.
Places subject to strong electric or magnetic fields.
.
In a location subject to much electrical noise especially
subject to static electricity noises.
4.
Precautions when installed in vehicle
.
Do not attempt to operate (by turning on the main
power) the FDDR-7000 and BKFD-7800 while the
vehicle is moving. (Vehicles are prohibited from
moving while the FDDR-7000 and BKFD-7800 are
turned on.)
.
The operating environment must satisfy the following
impact resistance characteristics and vibration resistance
characteristics for hard disks both while the vehicle is
stopped and moving. (The hard disk non-operation
specifications of impact resistance characteristics and
vibration resistance characteristics must also be satisfied,
when a vehicle containing a hard disk moves.)
Temperature range
Operating temperature :
+
5 to
+
40
d
C (41 to 104
d
F)
Performance warranty :
+
10 to
+
35
d
C (50 to 95
d
F)
Storage temperature
:
_
20 to
+
60
d
C (
_
4 to
+
140
d
F)
Humidity
Operating humidity
: 20 to 80 % (no condensation)
Storage humidity
: 20 to 85 %
.....
HDD UNIT BKFD-7009/7009A (Internal Hard Disk)
Operating altitude
:
_
1,000 to10,000 feet
(
_
305 to 3,048 m)
Storage altitude
:
_
1,000 to 40,000 feet
(
_
305 to 12,210 m)
Impact resistance characteristics
<HDD operation specifications>
Performance warranty : Maximum 2.0 G (Half period of
sine wave, max. 11 ms)
Operation warranty
: Maximum 10 G (Half period of
sine wave, max. 11 ms, 2 impacts/
second)
<HDD non-operation specifications>
: Maximum 50 G (Half period of
sine wave, maximum 11 ms
without repetitive impact). Or,
maximum 100 G (Half period of
sine wave, maximum 2 ms
without repetitive impact)
Vibration resistance characteristics
<HDD operation specifications>
Performance warranty : 5 to 400 Hz, maximum 0.5 G
Operation warranty
: 5 to 400 Hz, maximum 0.5 G
<HDD non-operation specifications>
: 5 to 22 Hz, maximum
displacement 0.033 inches
(1 mm), 22 to 400 Hz,
maximum 2.0 G
