1-11(E)
FDDR-7000 IM
1-5. Installation and Removal of Exterior Parts
B3
x
5
Front panel
B3
x
5
Top plate
B4
x
5
B4
x
5
B4
x
5
1-5. Installation and Removal of Exterior
Parts
w
To avoid shock hazards and/or damage to the mounted
circuit boards, be sure to turn off the power switch or
unplug the power cord before installing and/or removing
the exterior parts.
1-5-1. FDDR-7000 (Multi-channel digital disk
recorder)
n
Before powering off the FDDR-7000, it is necessary to
prepare for shutdown with the SHUTDOWN button. If
you simply turn the power switch off while recording or
playback is in progress, recorded material or system
information may be lost, and the system will not subse-
quently function correctly.
When the BKFD-7800 (HDD extension box) is connected,
power on the BKFD-7800 first, and then the FDDR-7000.
Do not power on the host computer until after all connect-
ed FARAD systems are powered on.
1. Front Panel
(1) Turn off the power switch.
(2) Remove the four screws and the front panel.
(3) Install the front panel in the reverse order of the steps
(1) and (2).
2. Top Plate
(1) Turn off the power switch.
(2) Remove the front panel. (Refer to “1. Front Panel” in
this section.)
(3) Remove the eight screws and the top plate.
(4) Install the top plate in the reverse order of the steps (1)
through (3).
