Sony DXC-S500, Service Manual

Page: 36 / 148

5-2
DXC-S500 (E)
MENU
DISP/INFO HIST
SHUTTER CAM GAIN RED GAIN BLUE
AE LOCK
ERASE PLAY
PC CARD
CAPTURE REC
MANUAL AUTO MANUAL
KEY
LOCK
AE MODE WHITE WB MODE
EV COMP
EZ FOCUS/INDEX
ENTER
MENU
EXIT
DISP/INFO HIST
SHUTTER CAM GAIN RED GAIN BLUE
AE LOCK
LIVE
ERASE PLAY
PC CARD
CAPTURE REC
MANUAL AUTO MANUAL
KEY
LOCK
AE MODE WHITE WB MODE
EV COMP
EZ FOCUS/INDEX
ENTER
1 2 3 7 8 9 !/ 6 5 4 !-
!=
CAMERA
IEEE
1394
FLASH
VIDEO S VIDEO
ON OFF
~ AC IN
TRIG IN
NTSC
PAL
FS1 FS2
REMOTE OUTPUT
1 2 3 4
5
5-1-2. Buttons on Front and Rear Panels
Control panel
1
LCD monitor
2
MENU button
3
Arrow (
←
,
↑
,
→
, and
↓
) keys
4
ENTER button
5
AE LOCK button
6
SHUTTER button
7
AE MODE button and MANUAL indicator
8
CAM GAIN (camera gain) volume control
9
WHITE (white balance) button and AUTO indicator
0
GAIN volume controls (blue and red)
!-
I/O power switch
!=
WBMODE (white balance mode) button and
MANUAL indicator
Rear panel
1
I/O power switch
2
S-VIDEO (S video output) connector
3
NTSC/PAL selector switch
4
CAMERA connector
5
TRIG IN (trigger input) connector
5-2. Test (Adjustment) Mode
The test mode is provided as the adjustment mode of each
board.
m
Confirm the following items before entering the test mode.
.
The board has been replaced (repaired).
.
No PC cared is inserted into the PC card slot.
Entering the test mode
n
In this procedure, the “power switch on the rear panel” and
“I/O power switch on the control panel (referred to as I/O
power switch hereinafter)” are separately described to
distinguish two types of power switches. All other
switches and buttons are located on the control panel of
CCU.
1. Turn on the power switch on the rear panel.
The power indicator (D201 on the PSW-77 board)
lights in amber.
2. Press the I/O power switch while pressing and holding
the “ENTER” button.
The power indicator (D201 on the PSW-77 board)
lights in green.
n
Press the “ENTER” button continuously until “<<
CAMERA CONTROL UNIT >> ADJUSTING
MODE” is displayed on the LCD screen.
3. Press the “MENU” button once when << CAMERA
CONTROL UNIT >> ADJUSTING MODE” is
displayed.
4. Move the cursor using “arrow (
←
,
↑
,
→
, and
↓
)” keys
and enter the password (20015259).
5. Press the “ENTER” button.
If “PASSWORD OK” is displayed, the DXC-S500 is
put into the adjustment mode.
6. Press the “MENU” button two times.
“ADJUST MASTER MAIN MENU” (referred to as an
adjustment menu hereinafter) is displayed.
<< ADJUST MASTER MAIN MENU >>
EVR & DSP SETTING
VALUE & TEST SETTING
LCD & VBS1 SETTING