Sony DMX-R100, Operating Instructions Manual

Page: 82 / 134

82
Chapter 3 Menu
Chapter 3 Menu
Menu Windows
1 Title list
2 SAVE AS NEW button
3
SAVE button
4
DELETE button
6 FREE SPACE display
7 STORAGE MEDIA buttons
8 FDD OPERATION buttons
9 CURRENT TITLE
CLEAR button
Open loop control and closed loop control
The open loop control is a one-way control mode
where the command is sent to the machine, but the
return signal is not received from the machine. In the
closed loop mode, the return signal is received from
the machine. Thus, 2 MIDI cables (one for the send
command and the other is for the return signal) are
required in the closed loop control.
0 INFORMATION section
qd Transport control buttons
Touch the corresponding button to issue the FF, REW,
PLAY, STOP or REC command to the current
machine.
To set the machine to record mode, touch the REC
button first to make it active, then touch the PLAY
button. Or touch the REC button while playing.
TITLE MANAGER Window
To open this window, touch the SYSTEM button to
open the SYSTEM menu, then select “TITLE
MANAGER.”
This window allows you to create, store and load the
mixer’s titles.
In the DMX-R100, data related to a project (snapshot
data, automation data, library data, settings for
sampling frequency, timecode mode, etc.) is called
“Title.”
There are two types of titles:
• Current title which is the data associated to the
current project.
• Title stored as a file
For the structure of the title in memory, see page 100.
1 Title list
Displays the list of titles stored in the media selected
by the STORAGE MEDIA button
6 .
A maximum of 10 titles can be stored in the flash
memory.This depends on the size of the title.
When you open this window, the title loaded last is
selected.
You can store a maximum one title on one floppy
disk. However, 2 or more floppy disks may be
required to store 1 title depending on its size.
5 LOAD button