Sony DMX-R100, Operating Instructions Manual

Page: 60 / 134

60
Chapter 3 Menu
Chapter 3 Menu
LCR long-chained button: When this button is lit, the
L/C/R, LS, and RS channels are linked.
When the chain buttons are lit, the associated channels
are linked automatically.
When both of the LCR short- and LS/RS short-chained
buttons are lit, the LCR long-chained button is lit
automatically.
Note
Though the LINK button and the KEY button on the
DYNAMICS window are not included in the linking
functions in this window, they will be simultaneously
set to READY/DROP IN, if the DYNA button is lit in
the SURROUND LINKING FUNCTIONS group.
COPY section
3
COPY tab
When this tab is selected, you can select the subject to
be copied, and the source and destination channels of
the copy.
5
Function buttons
Touch and light the desired function buttons.
• TRIM
• DLY (delay) • ST MODE
• EQ/FIL •DYN (dynamics) • CH PAN
•CH FDR (CH fader) • CH CUT
• PGM ASGN (PGM assign) • MTR PAN
• MTR FDR (MTR fader) • MTR CUT
• MTR ASGN (MTR assign)
• SURN PAN(surround pan
• AUX NOB (AUX knob)
• AUX BT (AUX button)
• CUT GP(cut group)
• FDR GP(fader group)
6 SOURCE CHANNEL and DESTINATION
CHANNEL boxes
When the copy is executed, the SOURCE CHANNEL
box shows the source channel, and the
DESTINATION CHANNEL box shows the last
channel to which the copy was executed.
Copying the setting of the channel
1
Touch the COPY tab on the window.
2
Select the desired functions to be copied by
touching the Function buttons on the window.
3
Hold the ACCESS button of the source channel
down for 1 second or more.
The ACCESS button blinks showing that the
console is in copy mode.
4
While the source channel ACCESS button is
blinking, press the ACCESS button of the
destination channel.
The settings of the source channel subject selected
in step 2 are copied.
The input assignments set in the AUDIO INPUT
ROUTING window are not copied.
5
Press the ACCESS button of the source channel.
The blinking ACCESS button stops blinking and
stays lit, and the copying operation is cancelled.
To copy the settings to a channel on a
different page
You can copy the settings of channels 1 to 24 to
channels 25 to 48 and vice versa.
1
Hold the ACCESS button of the source channel
down for 1 second or more.
The ACCESS button blinks.
2
Press the other Page selectable button in the
Assignment panel.
The pages are switched. The source channel
disappears from the Channel strip panel. However,
the settings of the source channel remain effective.
3
Press the ACCESS button of the destination
channel.
The settings of the source channel are copied.
Menu Windows