2-17
DMW-S01NL/S02NL/ST001
e) CN-2068 Board and CN-2069 Board
(1) Remove the AV I/O block. (Refer to “Sec. 2-1-2”.)
(2) Disconnect the two cables.
(3) Remove the four screws (B3
x
5), remove the
CN-2068 and CN-2069 boards.
B3
x
5
B3
x
5
CN-2069 board
CN-2068 board
Cables
CN101
CN102
n
After replacing the CN-2068 and CN-2069 boards, be sure
to perform the operation check and adjustment, then
perform the reassembling of each parts.
2-1. Digital media workstation/A/V block
Adjustment after replacement of the MTS-11 board
After replacing the MTS-11 board, confirm the configu-
ration data that is downloaded to the PLD IC6001, is con-
formed to the application software version No. Refer to
Sec. 7-8 for version up procedure of this data. It also should
be performed the every electrical alignment items of this
board by referring to Section 7, Electrical Alignment.