1-24
DMW-S01NL/S02NL/ST001
.....
Rack mounting procedure
This section describes the rack mounting procedure using
the RMM-10 rack mount kit.
n
Tighten the screws to the following torque.
Tightening torque : 120
x
10
_
2
N
.
m {12.2 kgf
.
cm}
(1) Remove six screws and remove the feet from the
bottom of the unit.
(2) Attach the rack brackets to the side of the unit using
the specified six screws.
n
Use B4
x
6 screws. Using other screws may cause
problems in the operations of the unit.
(3) Attach the rack plate to the side of the equipment using
the specified four screws.
n
Use B4
x
8 screws. Using other screws may cause
problems in the operations of the unit.
1-7. Rack Mounting
B4
x
6
B4
x
6
B4
x
8
B4
x
8
Feet
Rack plates
Rack brackets
PSW4
x
20
1-7-1. DMW-S01NL/DMW-S02NL
The main unit (workstation with AV I/O block) of DMWS01NL/
DMW-S02NL is able to mount in the 19-inch standard rack.
To mount the DMW-S01NL/DMW-S02NL in the rack, use
the specified rack mount kit and follow the procedure
described below.
Required parts
.
Specified rack mount kit
: Sony RMM-10 (Optional accessory)
.
Rack cover
: 2 pcs (Supplied with DMW-S01NL/
DMW-S02NL)
.
Rack plate
: 2 pcs (Supplied with DMW-S01NL/
DMW-S02NL)
.
Rack plate attaching screws : 4 pcs (Supplied with DMW-S01NL/
(B4
x
8 : 7-682-561-09)
DMW-S02NL)
.
Unit attaching screws*
: 4 pcs
(10-32 UNF
x
1/2)
*
This screws are not supplied with DMW-S01NL/DMW-
S02NL.
n
If a rack mount kit other than the specified one is used, the
unit may not be mounted in the 19-inch standard rack.
Parts of the RMM-10
.
Rack brackets
: 2 pcs
.
Right rack mount adapter
: 1 pc
[Including two screws (B4
x
6 : 7-682-560-09)]
.
Left rack mount adapter
: 1 pc
[Including two screws (B4
x
6 : 7-682-560-09)]
.
Rack brackets and adapter attaching screws : 6 pcs
(B4
x
6 : 7-682-560-09)
.
Adapter attaching screws
: 6 pcs
(B4
x
10 : 7-682-560-10)