1-23
DMW-S01NL/S02NL/ST001
1-7. Rack Mounting
w
.
Be sure to use the specified rack mount kit.
If not, injury may result and the equipment may fall due
to insufficient strength.
.
After rack mounting, be sure to tighten the screws on the
rack angle and fix the unit in the rack.
If the screws on the rack angle are not tightened, the unit
may slip from the rack and fall, causing injury.
c
When mounting the unit in the rack, note the following:
.
Be sure to mount in the rack with two persons or more.
.
Be careful not to catch your fingers or hands in the rack
mount rail or others.
.
Mount in the rack in a stable position.
n
.
Do not ship or transport a rack mounted the unit while it
is mounted on the universal rails. Doing so will void the
factory warranty on the unit.
1-7. Rack Mounting
.
Rear side
Fan check indicator : (yellow)
Light up when abnormal operating of the fan
Power operate indicator : (green)
Light up when power supply voltage is supplied normally
Power check indicator : (amber)
Light up when power supply voltage is supplied abnormally
Cooling check indicator : (amber)
Blinking when several fans operates abnormally or drive
fan pack was removed
When more than two minutes passed during abnormal
status, HDD is turned off automatically
LCC check indicator : (umber)
Light up when LCC or connection is abnormally
LCC operate indicator : (green)
Light up when turned on the LCC
EXP
PRI
Fan check indicator
EXP
PRI
Power operate indicator
Power check indicator
Cooling check indicator
LCC check indicator
LCC operate indicator
.
Fan pack removing conditions
