Chapter 1
Overview
16
Chapter 1
Overview
Location and Function of Parts
Remote Controller
Upper section
1
STDBY (standby) button
When using a lens other than the special-purpose lens
(VCL-1205BYS), pressing this button puts the camera
into the standby mode, and stops down the iris to the
current setting.
2
LIVE/MEMORY button
Pressing this button toggles between the live and
memory monitor modes.
Live mode: The image from the camera lens is
output to the monitor. At this point the lens iris is
automatically in the fully-open position.
Memory mode: The image saved in the currently
selected memory is output to the monitor.
3
/– buttons
In the memory monitor mode, these buttons select the
memory.
: Pressing this button switches from the
currently selected memory to the next higher
numbered memory (1
n
2
n
3 ... ).
MEMORY –: Pressing this button switches from the
currently selected memory to the next lower
numbered memory (9
n
8
n
7 ... ).
4
FOCUS FAR/NEAR buttons
These adjust the focus.
FOCUS FAR: Pressing this button focuses further
away.
FOCUS NEAR: Pressing this button focuses closer
to the camera.
STDBY
USER
LIVE/MEMORY
E-ZOOM
IRIS
MEMORY FOCUS
ZOOM
FAR
NEAR
T
W
+
--
+
--
1
STDBY button
6
USER button
7
E-ZOOM button
8
IRIS +/– buttons
9
ZOOM T/W buttons
2
LIVE/MEMORY button
3
/– buttons
4
FOCUS FAR/NEAR
buttons
5
Release button
Hang the loop of string on the
tripod or some other safe place.
Note
The remote controller has a
slot in the back, through
which you can thread a loop
of string.
