Chapter 6
Maintenance
Chapter 6
Maintenance
63
Chapter 6 Maintenance
Error Messages
If the system is unable to operate normally because of a particular
combination of operations, an error message may appear on the monitor.
The following table lists the error messages, with their meanings and
appropriate action to take.
Message
Meaning
Action to take
BB:NG Please try again
Black balance adjustment failed.
Check the conditions, and try again.
COMMANDER IS LOCKED
The remote controller has been locked
by the computer.
Unlock the remote controller from the
computer.
FLASH CALIBRATION: NG
Flash calibration failed.
Check the condition of the flash, subject
and so forth, and try again.
MEMORY FULL
The memory for captured images is full.
Delete images no longer required from
memory.
MEMORY IS LOCKED
The currently selected memory for
captured images is locked (write-
protected).
Either unlock this memory, or select a
different memory.
Not available during transferring image
data
This operation is not possible during
image data transfer.
Wait until image data transfer is
finished.
Not available except AWB setting as C-
Temp
This operation is not possible unless the
“C-TEMP” menu item is set to “AWB.”
Set the “C-TEMP” menu item to “AWB.”
Not available in E-ZOOM mode
This operation is not possible in the
electronic zoom mode.
Exit from the electronic zoom mode and
retry.
WB:NG Please try again
White balance adjustment failed.
Check the conditions, and try again.
