Chapter 2
Operation
42
Chapter 2
Operation
Reviewing a Captured Image
In “increment on” mode
When the memory selection mode is set to “increment on,” pressing the
release button causes the system to automatically switch to review mode,
and display the captured image on the monitor screen for several seconds.
Thereafter it automatically returns to the live monitor mode. Thus you can
continue to capture images while quickly checking each one.
In “increment off” mode
In this mode, pressing the release button causes the system to switch to the
memory monitor mode, and display the captured image on the monitor
screen. The same image remains displayed until you select the live
monitor mode again.
Selecting memory monitor mode to check images
Whether in the “increment on” or “increment off” mode, you can check the
contents of any particular memory by using the following procedure.
1
If not in memory monitor mode, press the LIVE/MEMORY button to
switch to the memory monitor mode.
This displays the image held in the currently selected memory on the
monitor.
2
Press the /– buttons to select other memories to check.
This displays the image held in each selected memory on the monitor.
STDBY
USER
LIVE/MEMORY
E-ZOOM
IRIS
MEMORY FOCUS
ZOOM
FAR
NEAR
T
W
+
--
+
--
1
2
Shooting
