Chapter 3
Installation and Connections
Chapter 3
Installation and Connections
47
⁄
SCSI
FLASH
MONITOR
REMOTE
CAMERA
MODE SELECT
SCSI In
AC IN
SCSI Out
VIDEO
S-VIDEO
R
G
B
SYNC
FS
RS-232C
Attaching Ferrite Cores to Cables
To protect the digital processor against noise which may affect its
operation, attach supplied ferrite cores (noise filters) to some of the
connection cables as shown below.
How to open the ferrite cores
Use a screwdriver to
unlock the latches.
Type-A ferrite core
Type-B ferrite core
Type A
Type A
Type B
Type C
SCSI cable
S-video
cable
a)
9-pin remote
control cable
Power cord
Type-C ferrite core (for PAL model only)
Foot switch
cable
b)
Camera
cable
c)
Type C
To the camera
a) When placing the ferrite core on the cable, make one turn of cable
through the core.
b) To connect a foot switch cable to the PAL model of DKC-ST5, use a
Type-B ferrite core. When placing the ferrite core on the cable, make
one turn of cable through the core.
c) With the PAL model of DKC-ST5, place two Type-C ferrite cores on
the camera cable, one at the processor-side end of cable and the
other at the camera-side end.
