2-19
DCR-TRV40/TRV40E/TRV50/TRV50E
VC-283
DD-176
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the CAMERA section, set the CAMERA to the “Forced camera power ON” mode.
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
Setting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.
Exiting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
VC-283 board
JK-219 board
MA-408 board
Adjustment remote
commander (RM-95)
AC power
adaptor
AC IN
Mechanism deck
Lens section
DD-176 board
Extension cord (100P)
(J-6082-413-A)
Battery terminal board
(6P)
