40
Self-timer recording
Recording automatically starts in about 10 seconds after you set the self-timer. You can
also use the Remote Commander for this operation.
(
1
)
Set the POWER switch to CAMERA.
(
2
)
Press FN to display PAGE1 (p. 27).
(
3
)
Press SELFTIMER.
The
(self-timer) indicator appears on the LCD screen.
(
4
)
Press EXIT to make PAGE1 disappear.
(
5
)
Press START/STOP.
The self-timer starts counting down from about 10 with a beep sound. In the
last two seconds of the countdown, the beep sound gets faster, then recording
starts automatically.
To stop the countdown
Press START/STOP.
To restart the countdown, press START/STOP again.
To cancel self-timer recording
Press SELFTIMER so that the
(self-timer) indicator disappears from the LCD screen
while your camcorder is in the standby mode. You cannot cancel self-timer recording
using the Remote Commander.
Note
The self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to (CHG) OFF or VCR.
Recording a picture
2
FN
5
3
SELF
TIMER
START/STOP
