Sony DCR-IP210 Operating Instructions Manual Download

Page: 191 / 220

191

Troubleshooting

Types of trouble and how to correct trouble

Symptom

Cause and/or Corrective Actions

• Charging is completed.
• The battery pack is not properly inserted.

Insert it properly (p. 17).

• The POWER switch is not set to (CHG) OFF.

Set it to (CHG) OFF.

• The battery pack is not properly inserted.

Insert it properly (p. 17).

• Something is wrong with the battery pack.

Please contact your Sony dealer or local authorized Sony
service facility.

• This is because some functions use a linear mechanism.

This is not a malfunction.

• DISPLAY/TOUCH PANEL is pressed.

Press the LCD screen lightly.

Press DISPLAY/TOUCH PANEL on your camcorder or
DISPLAY on the Remote Commander (p. 43).

Adjust the LCD screen (CALIBRATION) (p. 204).

• The mirror mode is activated. This is not a malfunction

(p. 35).

• It occurs if you set DISPLAY to V-OUT/LCD in the menu

settings when using mirror mode. This is not a
malfunction.

• The USB cable was connected before installation of the

USB driver was completed.

Uninstall the incorrect USB driver and reinstall the USB
driver (p. 161).

• USB STREAM is set to OFF in the menu settings.

Set it to ON (p. 184).

• Moisture condensation has started to condense in your

camcorder (p. 201).

While charging the battery pack
inserted in your camcorder, the
battery CHG lamp does not light up.

You cannot charge the battery pack
inserted in your camcorder.

While charging the battery pack
inserted in your camcorder, the
battery CHG lamp flashes.

When you set the POWER switch to
VCR or (CHG) OFF, if you move
your camcorder, you may hear a
clattering sound from inside your
camcorder.

The buttons do not appear on the
touch panel.

The buttons on the LCD screen do
not work.

The indicators appear mirror-
reversed in the viewfinder.

The characters on the TV screen are
reversed.

Image data cannot be transferred to
your computer by the USB
connection.

A cassette cannot be removed even if
the cassette lid is open.

Summary of Contents for DCR-IP210





























































































































































































































Search results

Summary of Contents for DCR-IP210

Reviews:

Related manuals for DCR-IP210

Brands by name

Popular brands

Sony DCR-IP210, Operating Instructions Manual

Search results

Summary of Contents for DCR-IP210

Reviews:

Related manuals for DCR-IP210

Brands by name

Popular brands