Sony DCR-IP210 Page 104 Operating Instructions Manual Download

Page: 104 / 220

104

To return to FN

Press EXIT.

To execute settings

Press EXEC or

OK.

To cancel settings

Press

OFF or

AUTO. The display returns to PAGE1, 2 or 3.

Notes

•When using the touch panel, press the LCD screen lightly with your finger or the

supplied stylus (DCR-IP220 only).

•Do not press the LCD screen with sharp objects other than the stylus supplied (DCR-

IP220 only).

•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You

can control the display with DISPLAY/TOUCH PANEL on your camcorder.

•When operation buttons do not work even if you press them, an adjustment is

required (CALIBRATION) (p. 204).

•When the LCD screen gets dirty, use the supplied cleaning cloth.

When executing each item

The green bar appears above the item.

If the items are not available

The color of the items changes to gray.

Press FN to display the following buttons:

In the memory camera mode

PAGE1 SPOT FOCUS, MENU, PLAY, INDEX, SPOT METER, EXPOSURE

PAGE2 SELFTIMER, PLAY, INDEX, MEM MIX

PAGE3 LCD BRT, PLAY, INDEX, VOL

In the memory playback mode

PAGE1 MENU, CAM, INDEX, DELETE,

–

PAGE2 PB ZOOM, CAM, INDEX, DATA CODE,

–

PAGE3 LCD BRT, CAM, INDEX, VOL,

–

Using a “Memory Stick” – Introduction

Summary of Contents for DCR-IP210





























































































































































































































Search results

Summary of Contents for DCR-IP210

Reviews:

Related manuals for DCR-IP210

Brands by name

Popular brands

Sony DCR-IP210, Operating Instructions Manual

Search results

Summary of Contents for DCR-IP210

Reviews:

Related manuals for DCR-IP210

Brands by name

Popular brands