Sony BKMW-E3000, Installation Manual

Page: 8 / 34

1-4 (E)
BKMW-E3000
Modify the front panel.
Attach the SW-1106 board.
Attach the harness (HP-SW).
Attach the front panel (E).
1-3. Setting after Installation
Pattern [A] Pattern [B]
Pattern [C]
Pattern [A] and [B]
Attach
the IF-886
board.
Attach the IF-886
board after removing
the DIF-109 board.
Set the DIP switch
S101-4 of the VN-13
board assembly to “ON”.
Attaching to
the EPR-1
board
1
Flow chart of the rear side of the VTR (Refer to Section 1-2-1)
1
2
Flow chart of the front side of the VTR
(Refer to Section 1-2-2)
Attaching
ETHERNET
panel
Attach the IF-885 board.
Connect the connection cable
and harness (LED).
Attach the harness guard assembly.
Pattern [C]
Attach the ferrite clamp.
Attach the VN-13 board assembly.
Connect the connection code and harness (LED).
Connect the harness (EPR-VN).
2
Attach the ETHERNET panel.
(In hte case of the player ; Attach the blank sheet.)
Attaching the
VN-13 board
assembly
1-1-2. Installation Flow Chart