1-16 (E)
BKMW-E3000
Format escutcheon
Hook
Hook
Hooks
Front panel (E)
(for the BKMW-E3000)
NG
OK
BVTT3
x
6
CN1
SWC-40 board
LED-357 board
CN1
Harness (12 pin)
3.
Remove the format escutcheon.
(1) Break the two claws A of the format escutcheon
using the pliers, and remove them.
(2) Release the three claws B from the front panel,
and remove the format escutcheon in the arrow
direction.
4.
Attach the format escutcheon removed in step 3 to the
front panel (E) for the BKMW-E3000, and snap on the
three hooks as shown in the figure.
5.
Remove the SWC-40 board.
(1) Disconnect the harness from the connector CN1
on the LED-357 board.
(2) Remove the two screws and remove the SWC-40
board.
(3) Disconnect the harness (12 pin) from the connec-
tor CN1 on the SWC-40 board.
6.
Disconnect the harness (9 pin) from the connector
CN4 on the HP-101 board, and remove it.
Front panel
Claw B
Claws B
Format escutcheon
Format escutcheon
Claw A
Claw A
Harness (9 pin)
HP-101 board
HP-101 board
CN4
CN4
Summary of Contents for BKMW-E3000
Page 2: ......
Page 32: ......
Page 34: ...Printed in Japan Sony Corporation 2004 8 08 B P Company 2004 BKMW E3000 SY J E 3 857 276 01 ...