Sony BKMW-E3000, Installation Manual

Page: 22 / 34

1-18 (E)
BKMW-E3000
1-3. Setting after Installation
Install the supplied application software “e-VTR Manager” on a personal computer (PC) meeting the
following requirements.
“e-VTR Manager” may not perform normally if installed on a PC that does not meet these requirements.
OS: Microsoft Windows XP
Microsoft Windows 2000
Web browser: Netscape (Ver. 6 or later)
Internet Explorer (Ver. 5 or later)
DirectX: 8.1b or later
CPU: 1 GHz or higher
Memory: 256 MB or more
Hard disk: Available space 5 MB or more
Drive: CD-ROM
Display: Recommended XGA (1024
x
768) or more
Windows, Windows XP, and Internet Explorer are registered trademarks of Microsoft Corporation.
Netscape is a registered trademark of Netscape Communications Corporation.
1-3-1. Network Setting
1. Check that no cable is connected to the Ethernet connector of the connector panel.
n
If the following steps are performed with the LAN cable connected, the network setting is not
incorporated to the VTR correctly.
2. Activate the maintenance mode. (Refer to Section 1-1-1.)
3. Turn the MULTI CONTROL knob to display “M5 : NETWORK” in the menu display area.
4. Press the F5 (SET) button.
. On pressing it, “M50 : IP ADDRESS” is displayed.
DISPLAY
FULL/FINE
HOME F1
VIDEO
CHANNEL
CONDITION
TC CH1 CH2 CH3
INSERT ASSEMBLE
CH4 CH5 CH6 CH7 CH8
F2 F3 F4 F5 F6
RESET
KEY INHI
ARARM
PUSH/
SHIFT
PLAYER
RECORDER
SHUTTLE/VAR
JOG
MULTI
CONTROL
R
EV
ER
SE
FOR
W
AR
D
SH
UTT
LE VAR
JOG
PHONES
POWER EJECT
REMOTE
NETWORK 1 (9P) 2 (50P) RS-232C
VIUB
SET
UP MO : CHECK
SET EXIT
DF LTC VITC 2F 59.94
IMX 525
TOTL:01:23:05
01:23:45:06
78. 9%
CONFI
DOLBY NR
ON
Menu display area
HOME button F5 (SET)
button
F6 (EXIT)
button
SHIFT
indicator
Network enable switch
MULTI CONTROL knob