3-8
PFM-500A3WE/500A3WG/500A3WU/510A2WE/510A2WG/510A2WU
b) DATA EDIT
Menu Structure
The following items of the source data that is copied to the Editing RAM can be
modified as described below.
Note : A maximum of 8 lines of the above menu can be displayed on screen. The other menu items can be
displayed by scrolling the display by moving the cursor up or down.
DATA EDIT
INPUT SELECT
H FREQUENCY
V FREQUENCY
SYNC POL (H/V)
TOTAL H PIXEL
LEFT EDGE
H RESOLUTION
TOP EDGE
V RESOLUTION
DOT PHASE
CP PLACEMENT
CP DURATION
INTERLACE MODE
FILED MODE
FRAMELOCK MODE
MATRIX SELECT
PICTURE AGC
ASPECT
ZOOM
APERTURE INIT
APERTURE HIGH
APERTURE MID
APERTURE LOW
AUTO PLL
SYNC WIDTH (
µ
s)
: 1100000
: 31.47 [kHz]
: 60.00 [Hz]
: NEGA/NEGA
: 800
: 140
: 640
: 35
: 480
: 128
: 005
: 016
: OFF
: OFF
: OFF
: ITU709
: ON
: 4
×
3
:
×
1
: MID
: 000
: 002
: 004
: ON
: 003.81
(1) Acceptable type of input signal
(2) Horizontal frequency
(3) Vertical frequency
(4) Sync signal polarity
(5) Total number of horizontal dots
(6) Horizontal dot position to start reading
(7) Horizontal resolution (Number of dots)
(8) Vertical dot position to start reading
(9) Vertical resolution (Number of dots)
(10) Dot phase
(11) Clamp pulse width (Number of dots)
(12) Clamp pulse position (Number of dots)
(13) Interlace setting
(14) In-field processing setting
(15) Vertical sync setting
(16) Color difference matrix setting
(17) Automatic brightness adjustment setting
(18) Aspect ratio setting
(19) Zoom setting
(20) Aperture initial value setting
(21) Aperture data setting
(22) Aperture data setting
(23) Aperture data setting
(24) Automatic PIXEL ADJUST setting
(25) Horizontal sync signal width
