1-2
PFM-500A3WE/500A3WG/500A3WU/510A2WE/510A2WG/510A2WU
2
(GB)
WARNING
Owner’s Record
The model and serial numbers are located on the rear.
Record the model and serial numbers in the spaces provided
below. Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
For the customers in Canada
This class A digital apparatus complies with Canadian ICES-
003.
For the customers in Europe
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.
or
Clamps
For PFM-510A2WE/510A2WG/500A3WE/
500A3WG users
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-yellow
: Earth
Blue
: Neutral
Brown
: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the safety earth symbol
I
or coloured
green or green-and-yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
The socket-outlet should be installed near the equipment
and be easily accessible.
Note
When you connect a computer to this monitor,
attach the supplied ferrite cores. If you do not do
this, this monitor will not conform to mandatory
FCC/IC/CE (EN55022) standards.
Attaching the ferrite cores
Set the ferrite cores on the both ends of the AC
power cord. Close the lid tightly until the clamps
click.
3
(GB)
English
GB
Table of Contents
Precautions ............................................................... 5 (GB)
Features ..................................................................... 6 (GB)
Location and Function of Parts and Controls ....... 7 (GB)
Front / Sides ............................................................. 7 (GB)
Control Panel ........................................................... 8 (GB)
Right Connector Panel ............................................. 9 (GB)
Left Connector Panel ............................................. 10 (GB)
Remote Commander RM-921 ................................ 11 (GB)
Installation ............................................................... 13 (GB)
Using the Retractable Feet ..................................... 13 (GB)
Caution ................................................................... 13 (GB)
Connections ............................................................ 14 (GB)
Connecting the AC Power Cord ............................ 14 (GB)
Connection Example .............................................. 14 (GB)
Using On-screen Menus ........................................ 16 (GB)
Operating Through Menus ..................................... 16 (GB)
Menu Guide ........................................................... 16 (GB)
Watching the Picture .............................................. 20 (GB)
Switching the Input Signal ..................................... 20 (GB)
Switching the Display Mode .................................. 20 (GB)
Input Signal and Monitor Status Information
Display .............................................................. 21 (GB)
Adjusting the Picture ............................................. 23 (GB)
Adjusting the Contrast, Brightness, Chroma,
and Phase, etc. ................................................... 23 (GB)
Restoring the PIC CONTROL Menu Items to Original
Settings ............................................................. 24 (GB)
Resizing and Positioning the Picture ................... 25 (GB)
Resizing the Picture ............................................... 25 (GB)
Adjusting the Picture Position ............................... 26 (GB)
Restoring the Original Picture Size and Position ... 26 (GB)
Enlarging a 4:3 Image to a 16:9 Screen Naturally
(Wide Zoom Mode) .......................................... 27 (GB)
Adjusting the Pixels ............................................... 28 (GB)
Using the Memory Function .................................. 29 (GB)
Storing the Current Setting .................................... 29 (GB)
Calling Up a Stored Setting ................................... 30 (GB)
