Sony a500 Instruction Manual Download

Page: 68 / 178

Notes

• The

(Camera shake warning) indicator is not indicated in manual exposure

mode.

• When the mode dial is set to M, the ISO setting [AUTO] is set to [200]. In M mode,

the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary
(page 103).

• Press the button when you shoot with the flash. However, the flash range differs

according to the aperture value. When you shoot with the flash, check the flash range
(page 90).

Manual shift

You can change the shutter speed and aperture value combination without
changing the exposure you set.

Shoot the image after the
exposure is set.

• Check the exposure value on the EV

scale.
: Images become brighter.
Toward –: Images become darker.
The

arrow appears if the set

exposure is beyond the range of the EV
scale. The arrow starts flashing if the
difference becomes greater.

Standard value

Rotate the control dial while pressing the
AEL button to select the shutter speed
and aperture value combination.

AEL button

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands