Sony a500 Instruction Manual Download

Page: 171 / 178

171

Unable to magnify.
Unable to rotate image.

• Images recorded with other cameras

may not be enlarged or rotated.

No images changed

• You attempted to protect images

or specified DPOF without
specifying images.

Cannot create more folders.

• The folder with a name beginning

with “999” exists on the memory
card. You cannot create any
folders if this is the case.

Printing canceled

• The print job was canceled.

Disconnect the USB cable or
turn the camera off.

Unable to mark.

• You attempted to mark RAW

images on the PictBridge screen.

Printer error

• Check the printer.
• Check if the image you want to

print is corrupted.

Printer busy

• Check the printer.

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands