Sony a500 Instruction Manual Download

Page: 114 / 178

114

• Try to orient the face in front of the camera and keep it as level as

possible.

• Hold a clear smile with an open mouth. The smile is easier to detect when

the teeth are showing.

• If you press the shutter button while the Smile Shutter function is

activated, the camera shoots the image, and then returns to Smile Shutter.

Notes

• The Smile Shutter function works only when the camera is set to the autofocus in

Live View mode. It does not work in the following cases: if the camera is in
viewfinder mode, when using the manual focus, manual focus check, or smart
teleconverter functions.

• The drive mode is automatically set to

(Single-shot adv.).

• The AF illuminator does not work with the Smile Shutter function.
• If the camera does not detect a smile, change the settings for Smile Detection

Sensitivity.

• Smiles may not be detected correctly, depending on the shooting conditions.

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands