background image

2

Owner’s Record

The model and serial numbers are located 
on the bottom.
Record the serial number in the space 
provided below.
Refer to these numbers whenever you call 
upon your Sony dealer regarding this 
product.
Model No. DSLR-A500/A550
Serial No. __________________________

To reduce fire or shock hazard, do 
not expose the unit to rain or 
moisture.

IMPORTANT SAFETY 
INSTRUCTIONS
SAVE THESE 
INSTRUCTIONS.
DANGER - TO 
REDUCE THE RISK 
OF FIRE OR 
ELECTRIC SHOCK, 
CAREFULLY 
FOLLOW THESE 
INSTRUCTIONS.

If the shape of the plug does not fit the 
power outlet, use an attachment plug 
adaptor of the proper configuration for the 
power outlet.

Battery pack

If the battery pack is mishandled, the 
battery pack can burst, cause a fire or even 
chemical burns. Observe the following 
cautions.
• Do not disassemble.
• Do not crush and do not expose the 

battery pack to any shock or force such as 
hammering, dropping or stepping on it.

• Do not short circuit and do not allow 

metal objects to come into contact with 
the battery terminals.

• Do not expose to high temperature above 

60°C (140°F) such as in direct sunlight or 
in a car parked in the sun.

• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking 

lithium ion batteries.

• Be sure to charge the battery pack using a 

genuine Sony battery charger or a device 
that can charge the battery pack.

WARNING

Caution

Summary of Contents for a500



















































































































































































Reviews: