Sony a500 Instruction Manual Download Page 140

Page: 140 / 178

140

Viewing images on a computer

Using your computer

This section describes how to copy images in a memory card to a computer
connected using a USB cable.

The following environment is recommended for a computer connected to
the camera to import images.

Windows

OS (pre-installed): Microsoft Windows XP*

SP3/Windows Vista*

SP2

• Operation is not assured in an environment based on an upgrade of the

operating systems described above or in a multi-boot environment.

*1 64-bit editions and Starter (Edition) are not supported.
*2 Starter (Edition) is not supported.
USB jack: Provided as standard

Macintosh

OS (pre-installed): Mac OS X v10.3/Mac OS X v10.4/Mac OS X v10.5
USB jack: Provided as standard

Notes on connecting your camera to a computer

• Operations are not guaranteed for all the recommended computer environments

mentioned above.

• If you connect two or more USB devices to a single computer at the same time, some

devices, including your camera, may not operate, depending on the types of USB
devices you are using.

• Operations are not guaranteed when using a USB hub or an extension cable.
• Connecting your camera using a USB interface that is compatible with Hi-Speed

USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this
camera is compatible with Hi-Speed USB (USB 2.0 compliant).

• When your computer resumes from a suspend or sleep mode, communication

between your camera and your computer may not recover at the same time.

Recommended computer environment

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands