Sony a500 Instruction Manual Download

Page: 167 / 178

167

• When you print images at a shop, images can be printed with the date if you

ask them to do so.

For details, refer to the operating instructions supplied with the printer or
consult with the manufacturer of the printer.

A connection cannot be established.

• The camera cannot be connected directly to a printer that is not compliant

with the PictBridge standard. Consult the printer manufacturer as to
whether the printer is compliant with PictBridge or not.

• Set [USB connection] to [PTP] (page 154).
• Disconnect and connect the USB cable again. If an error message is

indicated on the printer, refer to the operating instructions supplied with the
printer.

Cannot print images.

• Check that the camera and the printer are properly connected using the USB

cable.

• RAW images cannot be printed.
• Images shot using cameras other than this camera or images modified with

a computer may not be printed.

Cannot print the image at the size selected.

• Disconnect the USB cable and reconnect it whenever you change the paper

size after the printer has been connected to the camera.

Cannot operate the camera after canceling printing.

• Wait for a while as the printer is carrying out the cancellation. It may take

some time depending on the printer.

The lens gets fogged.

• Moisture condensation has occurred. Turn off the camera and leave it for

about an hour before using it (page 172).

PictBridge compliant printer

Others

Summary of Contents for a500



















































































































































































Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands

Sony a500, Instruction Manual

Search results

Summary of Contents for a500

Reviews:

Related manuals for a500

Brands by name

Popular brands