Ot
h
e
rs
165
Your computer does not recognize your camera.
• Check that the camera is turned on.
• When the battery level is low, install the charged battery pack (page 13), or
use the AC Adaptor (sold separately).
• Use the USB cable (supplied) (page 141).
• Disconnect the USB cable, and connect it again firmly.
• Set [USB connection] to [Mass Storage] (page 141).
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks of your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other device (page 140).
You cannot copy images.
• Make the USB connection by properly connecting the camera with your
computer (page 141).
• Follow the designated copy procedure for your OS (page 142).
• When you shoot images with a memory card formatted by a computer, you
may not be able to copy the images to a computer. Shoot using a memory
card formatted by your camera (page 131).
The image cannot be played back on a computer.
• If you are using “PMB,” refer to the “PMB Guide.”
• Consult the computer or software manufacturer.
After making a USB connection, “PMB” does not start automatically.
• Make the USB connection after the computer is turned on (page 141).
Cannot insert a memory card.
• Insertion direction of the memory card is wrong. Insert it in the correct
direction (page 22).
Cannot record on a memory card.
• The memory card is full. Delete unnecessary images (page 123).
• An unusable memory card is inserted (page 23).
Memory card
Summary of Contents for a500
Page 178: ...178 ...
