154
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Cable
Use
Cable
to set the cable connection mode and the connection
parameters used when communicating through your P908's
cable port.
•
Set the cable connection mode. Please note that you must set
the mode to
Modem
when using the P908 as a modem and
when using the DUN (Dial-up Networking) Wizard.
•
Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P908 via the desk stand to a USB port on
your PC, use the following (default) settings:
Tip You can set the cable connection mode when the Flip is
closed by selecting
Applications >
Connections
>
Cable.
GSM Networks
This option lets you choose what net to use when you are
outside your operator’s area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
•
Search mode
– Select between automatic or manual search for
a network.
•
Select network
– Tap the button to get a list of available
networks.
•
New search
– Tap the button to search for available networks.
•
Preferred list
– Show the networks that your P908 will search
for when you are outside your home network.
Note Your operator may not allow you to access all available
networks.
To add a network to the preferred list
1. Tap
Add network
.
2. Select a network from the displayed list.
3. Select a position in the Preferred list and tap
Done
.
Baud rate
115200
Parity
None
Stop bits
1
Character length
8
Flow control
CTS/RTS
