Internet
83
This is the Internet version of the user’s guide. © Print only for private use.
Preferences
The browser is initially set up to work, but you have to set up
your own account.
The easiest way to set up Internet and WAP accounts is to ask
your Internet service provider to send you an auto setup message
containing the required setup information. The accounts will
then be set up automatically on your P908. To guarantee the
integrity of the settings, a PIN may be used.
For security reasons, some WAP pages and services, for
example on-line banking, can only be accessed from a particular
WAP account. See
information.
Note Proxy settings for MMS messages, and for a WAP gateway
should be set in the WAP accounts. Other proxy settings should
be set in the Internet accounts.
To set up the browser
1. Select
Edit > Preferences
.
2. Perform the setup according to the following:
Basic settings
– Enter the URL for the page to be shown when the browser
is started from the Internet button; either a page stored in
the P908 or a page on the Internet.
– Select the WAP account to be used when the home page is
loaded. The accounts are set up in the control panel.
– Select if a new page should be displayed over the whole
screen.
– Select if you want to use a vertical scroll bar to scroll the
pages up and down. Otherwise you can use the Jog Dial.
– Select if images should be loaded. If images are not
loaded, the page will be loaded faster. Non-loaded images
can be loaded manually when viewing the page.
– Select if sounds should be played when the page is
opened.
– Select if animations should be played when the page is
opened.
Security settings
– Select if you want to save signed documents.
– Select if you want to connect without giving away your
identity.
– Select if you want to connect using the WIM card.
– Select if you want to allow cookies.
Advanced settings
– Select if you want to be able to receive messages from
your WAP service provider.
– Select if you want to automatically open the URL in WAP
Push messages.
