164
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
To enable Cell Information
Select the
Cell information
check box
To turn Area Information on
1. Check the
Area information
check box. Received messages
will be automatically stored, and displayed in the list when
dismissed.
2. The list shows all the channels that you have defined on your
P908. The check box for each channel shows if it is on
(checked, ready to receive messages) or off (cleared, not
active):
To add a new channel
1. Select
New
.
2. Enter the number of the new channel in the New Channel
dialogue. Channel numbers can be from 0 to 999. If there are
too many channels defined,
New
will be disabled.
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and check the check box. To turn it
off, clear the check box.
To delete a channel
Select
Delete
. Since deleting a channel cannot be undone, you
will be asked to confirm the delete. Deleting the channel will
also delete any stored Area Information messages for that
channel in your Area Info Inbox.
WAP accounts
Use these settings to set up and manage WAP accounts on your
P908.
WAP accounts are intended for multimedia messages and for
accessing the Internet through a WAP gateway. (Such gateways
make use of proxy port 9200-9203.) All other proxy settings
should be included in your Internet accounts.
For security reasons, some WAP pages and services, for
example online banking, can only be accessed from a particular
WAP account.
The dialogue has two tabs:
Basic
and
Preferred.
Basic tab
The dialogue shows a list of all the WAP accounts on your P908.
You can add a
New
account to the list and
Edit
or
Delete
an
existing account.