Control panel
167
This is the Internet version of the user’s guide. © Print only for private use.
IP Security manager
The IP security manager displays stored policies and only one
policy can be activated at a time.This is used for secure
connections over the Internet, typically to a corporate intranet. If
needed, your company information services department will
supply the necessary information.
There are two types of passwords needed:
•
IP security password
: is to be set when activating the very
first policy, that is, this password is only set once, but it is
possible to change it later at any time by tapping the
Password
button.
•
Activation password
: is needed when a policy is activated
for the first time and the supplier of the policy gives this.
Language selection
Use this list of all languages stored on your P908 to change
language. The highlighted entry is the language presently in use.
When you have selected a new language, you have to turn the
P908 off and then on again for the change to take effect.
Master reset
Use
Master reset
to reset your P908.
Note All user data, as well as pre-installed media files and
application data files (including, for example, backgrounds,
ring signals and pictures), will be deleted and settings will be set
to the state they were, after you selected the language. The
selected local language will be restored.
If you have backed up your user data, you can restore it from the
backup, see
You can restore media files and application data files from the
Multimedia for P908 CD, or from the Web.
If you want to keep installed applications, clear the
Delete user
installed applications
check box.
Secure tokens
If you need access to a network that requires secure access
(often known as ‘strong authentication’), for example a
corporate intranet, you can set up the Internet account you use to
log in to that network to use secure access and generate the
required one-time password when you make the connection.
Your P908 supports the following secure access systems:
•
SecureID from RSA