Page 52 of 87
System Router
Symptom
Cause
Actions
Router has not been authorized
to the receiver
Manually authorize router to receiver
or use auto-‐commissioning
Check aerial on receiver
No radio connection
Check aerial on router
Receiver not switched on
Switch receiver on
Router not switched on
Switch router on
Incorrect supply polarity
Check supply polarity
No connectivity to receiver
Router fuse
Check router fuse is OK, replace if
necessary
Router appears in "Unknown"
category in CMS when
commissioning
Router has joined network but
has yet to pass configuration
data to the receiver
None -‐ normal operation
Router stays in "Unknown"
category in CMS when
commissioning for more than 3
minutes
Router hardware error
Check router options fitted (thermistor,
RH&T element)
Router connects directly to the
receiver, even though there's a
router between them
Normal. A router will ALWAYS
join a network using the least
number of "hops" to the
receiver.
None -‐ normal operation. The router
will re-‐join the network via the other
router if it loses its direct path to the
receiver
Only 4 routers connect directly to
my receiver
Normal. The maximum number
of directly connected routers a
receiver will allow is 4,
if there
are 12 directly connected EDs
None -‐ normal operation
Only 8 routers connect directly to
my router
Normal. The maximum number
of directly connected routers a
router will allow is 8
if there are
8 directly connected EDs
None -‐ normal operation
Summary of Contents for RF--RXS--B
