Page 10 of 87
230Vac Powered Routers
The 230Vac powered RF-‐RR-‐MPR routers can be used in conjunction with the Sontay
®
RF-‐RXS-‐B
receiver,
RF-‐IOM
IO modules, 24V powered
RF-‐RR
routers and
RF-‐RS
series of battery powered radio sensors, and
are used to route signals from battery powered nodes and other routers to the receiver, where the signal
strength of a direct path is not sufficient for reliable communications.
NB
Each router can support a
maximum of 16 “children”, which can consist of a maximum of 8 battery powered nodes and 8 routers,
or
up to 16 routers
if
there are no battery powered nodes. Consideration should be given on network planning
for redundancy in case of router failure or damage.
NB
-‐
the
RF-‐RR-‐MPR
230Vac has no sensor capability.
Specification
:
Radio Output:
Frequency
2.4GHz
16 channels, automatically selected
Direct-‐sequence spread spectrum
Compliance
IEEE 802.15.4-‐2006
Aerial Characteristics:
Gain
2.0dBi
VSWR
<2:1
Data Encryption:
AES 128
Power Output:
+10dBm (10mW @ 50Ω)
Power Supply:
85 – 240Vac @ 50/60 Hz
Housing:
Material:
ABS (flame retardant)
Dimensions:
116 x 106 x 52mm
Environmental:
Ambient:
Temperature:
-‐30°C to +70°C
RH:
0 to 90%, non-‐condensing
Protection:
IP30
Summary of Contents for RF--RXS--B
