Page 29 of 87
To prevent leaving CMS in an admin state when not supervised, the admin log-‐in status automatically times
out after the time set in the “Change Idle Time” setting expires. To disable this feature (
not recommended
),
or to change the timeout value, from the menu bar choose <
Options
> then <
Change Idle Time
>
Removing the tick the Enable Idle Time Out box disables admin timeout feature. The timeout value can also
be changed.
List Devices
In the text display panel on the left of the window, a list of all devices on the network can be found. These
devices are divided into 4 main categories, receiver, routers, RF-‐IOMs and battery powered sensor nodes.
Receiver
Routers
EDs
RF-‐IOMs
Each category can be expanded to view more detail or collapsed to hide detail.
The “Unknown” category is initially populated by devices which are joining the network for the first time,
either by auto-‐commissioning or manual authorization. Devices are held in the unknown category until CMS
has determined the type of device trying to join (for example, a router or node) and which options, if any,
are fitted (such as setpoint). When CMS has determined this information, the device will then automatically
be placed in its appropriate category.
Note that if a measured value or an
RF-‐IOM
input is in an alarm condition, that input will be displayed in
red
in the text display (see screen shot above).
Summary of Contents for RF--RXS--B
