Sonos Controller for iPad
4-19
using Ethernet
.
4.
After your AirPort Express is configured, use the Sonos Controller for iPad to select
Room Settings
from the
Settings
menu.
5.
Select the Sonos component your AirPort Express is connected to, and touch
Line-In
to update the following settings:
•
Line-In Source Name
: Select
AirPlay Device
.
•
Line-In Source Level
: A default (typical) line-in source level is automatically assigned based upon the source
name. (If the volume sounds too low, you can select a higher line level. You may experience clipping at higher vol-
ume levels if you set the level too high.)
•
Autoplay Room
: Select the room you want your AirPlay device to play in whenever it’s connected to Sonos. You can
also select
Include Grouped Rooms
so that any rooms grouped with the
autoplay room
will play the same music.
•
Use Autoplay Volume
. Set
Use Autoplay Volume
to
Yes
if you intend to use your AirPlay device to adjust the
volume in the autoplay room. Use the slider to set a default volume for the autoplay room whenever the AirPlay de-
vice is connected.
Now you’re ready to use AirPlay—simply tap the AirPlay icon on your iPhone, iPad, iPod touch, or in iTunes and select
Sonos
.
For more information about setting up an AirPlay device with Sonos, go to
http://faq.sonos.com/airplay
.
Connecting a portable player to your Sonos system
1.
Using a 1/8 inch mini-stereo to RCA audio cable, plug the mini-stereo end into the portable device and the RCA end into
the
Audio In
connection on the Sonos component. The device will automatically be detected and displayed on the Sonos
controller.
2.
Choose one of the following options:
• To play music from this line-in source, select
Line-in
from the
Music
menu, select the room the device is connected to,
and touch
Play Now
.
• To change the settings for this line-in source, select
Room Settings
from the
Settings
menu.
Select the Sonos component this device is connected to, and then touch
Line-In.
•
Line-In Source Name
: Select a component name from the list.
•
Line-In Source Level
: A default (typical) line-in source level is automatically assigned based upon the source
name. (If the volume sounds too low, you can select a higher line level. You may experience clipping at higher
volume levels if you set the level too high.)
•
Autoplay Room
: Select the room you want your line-in source to play in whenever it’s connected to Sonos. You can
also select
Include Grouped Rooms
so that any rooms grouped with the
autoplay room
will play the same music.
•
Use Autoplay Volume
. Set
Use Autoplay Volume
to
Yes
if you intend to use your MP3 player to adjust the volume
in the autoplay room. Use the slider to set a default volume for the autoplay room whenever the MP3 player is con-
nected.
