Electrical connection
6
6.7.8 Attaching the fuse plugs
Prerequisite:
✔
All DC lines and BMS
communication lines are correctly
connected to the battery modules.
►
Attach the fuse plugs on all battery
modules.
Figure 47: Attaching the fuse plugs
6.7.9 Entering the battery capacity/nominal power on the type
plate
Tools:
•
Permanent marker
►
Mark off the correct battery capacity and nominal power on the type plate of
the storage system.
The type plate is located on the outside of the storage system. The battery capacity
and nominal power can be determined from the technical data (see page 12).
KD-291 | Part no. 52187 | EN | X01
page 51 of 63
Heruntergeladen von
Handbücher-Suchmachiene