5
Installation
5.6 Installing the storage system
This chapter describes how to install the storage system.
Figure 8:
Left: storage system with optional
extension cabinet (floor-mounted)
Right: storage system without optional
extension cabinet (wall-mounted)
A storage system with the optional
extension cabinet must be floor-
mounted.
A storage system without the optional
extension cabinet must be mounted to
the wall with screws.
5.6.1 Using the correct mounting materials
►
Use only screws with the following properties:
•
The diameter of the screw head must
be between 13 mm and 15 mm.
•
The screw diameter must be 8 mm.
•
The screw head must not exeed 5
mm.
5.6.2
Placing the levelling mat or the pedestal
The levelling mat (1) is part of the scope of delivery for the extension cabinet. It is
used to compensate uneven floors.
Alternatively the extension cabinet can be placed on an optional pedestal (3)
instead of the levelling mat. This is helpful if the extension cabinet doesn´t meet
flush with the wall (e.g. because a skirting board is mounted).
Figure 10:
The levelling mat (1) compensates
uneven floors. The optional pedestal (3)
can e.g. can be used in combination with
a skirting board (2)
1
3
2
►
Place the levelling mat or the
pedestal at the preferred installation
location.
page 22 of 63
KD-291 | Part no. 52187 | EN | X01
Abbildung 9: Parameters of the screws used
8 mm
13 ... 15 mm
5 mm
Heruntergeladen von
Handbücher-Suchmachiene