Electrical connection
6
6.2 Connecting the Ethernet cable
►
Use a patch cable with the following properties as the Ethernet cable:
•
Patch cable is Cat 5 e
•
Patch cable is shielded
•
One end of the patch cable has an angled male connector (1) so that the cover
can be completely closed.
►
Connect the patch cable (2) to the Ethernet port (XETH) of the main cabinet.
►
Connect the other end of the Ethernet cable to the router of the home
network (3).
Figure 25:
Connecting the Ethernet line to the top
of the main cabinet
1
Angled connector
2
Patch cable (not included in
scope of delivery)
3
Home network router
XETH Ethernet port
XETH
2
3
1
Upon commissioning, the storage system automatically establishes the connection
to the internet once the patch cable has been correctly connected.
If the connection to the internet is not automatically established after
commissioning:
►
Follow the instruction in section 8 (S. 59).
KD-291 | Part no. 52187 | EN | X01
page 31 of 63
Heruntergeladen von
Handbücher-Suchmachiene