Installation
5
5.6.3 Drilling the holes
Holes must be drilled into the wall to mount the storage system. The arrangement
of the holes depends on wheather the big or the small extension cabinet is used.
With small extension cabinet (up to 10 kWh)
Figure 11: Drill template for storage
systems with small extension cabinet
(figure is not to scale – all specifications
are in millimetres)
A Main cabinet
B Small extension cabinet
C Levelling mat (height: 10 mm) or
pedestal (optional – height: 80 mm)
16
10
15
32
83
8,
5
25
6
65
6
72
3
91
6
13
16
524
69
0
22
6
33
62
6
B
A
C
For storage systems consisting of main
and small extension cabinet:
►
Drill the holes shown in red in figure
on the left.
►
Note that the storage system must
be placed on the levelling mat or the
pedestal (C).
With big extension cabinet (up to 16 kWh)
Figure 12: Drill template for storage
systems with big extension cabinet
(figure is not to scale – all specifications
are in millimetres)
A Main cabinet
B Big extension cabinet
C Levelling mat (height: 10 mm) or
pedestal (optional – height: 80 mm)
16
10
15
32
83
8,
5
40
2
11
42
12
09
14
02
18
02
524
11
76
22
6
33
62
6
B
A
C
For storage systems consisting of main
and big extension cabinet:
►
Drill the holes shown in red in figure
on the left.
►
Note that the storage system must
be placed on the levelling mat or the
pedestal (C).
Without extension cabinet
If the storage system is used without extension cabinet it is a good idea to observe
the dimensions provided in one of the two figures above. That way no new holes
need to be drilled if the storage system is extended at a later time.
KD-291 | Part no. 52187 | EN | X01
page 23 of 63
Heruntergeladen von
Handbücher-Suchmachiene