28
S0 User Handbook
CO N F I G U R AT I O N O P T I O N S
C
ONFIGUR
A
TION OPTIONS
3
The Firmware Update function allows the S0 firmware to be regularly updated with new
features and bug fixes. New firmware releases will be made available on the Sonifex website.
To update the firmware, press the Update button and select the firmware file. The update
only takes a few minutes and the process can be monitored on the progress bar on SCi and
the meter display on the S0, which gradually changes from fully illuminated to off. When the
update is complete, the S0 will automatically reboot and SCi will reconnect and show the
new firmware version number.
The S0 is designed to power up in the same state it was in when power was removed. It
is possible to clear these saved settings so the mixer starts with all buttons and routing
switched off, except for those enabled by the default configuration options:
1.
Ensure all faders are closed.
2.
Press and hold the Monitor EXT1, Monitor AUTO CUE/PFL, Presenter AUTO CUE/PFL
and Guest AUTO CUE/PFL buttons.
3.
Press Reset Switch as shown in image below. A single sweep on the LED meters
indicates that the saved states are being reset. The buttons can be released.
4.
A dual sweep on the LED meters indicates return to normal operation.
Reset Switch
Fig 3-5: Reset Switch.
