18
S0 User Handbook
U S E R G U I D E
USER GUIDE
2
AUX INPUT CHANNEL 9
This stereo unbalanced 3.5mm jack socket is the auxiliary input to channel 9. It has 10dB
of gain at the input and is designed to connect directly to consumer level equipment. This
input is in addition to the primary auxiliary input on the rear panel.
Presenter AUTO CUE/PFL Button
When this button is selected, the normal output fed to the presenter’s headphones will be
replaced if one or more input channels have CUE/PFL selected. The channels with CUE/PFL
selected will be mixed and fed to this output without having to have the fader open. This
button illuminates green when selected.
Presenter SPLIT CUE/PFL Button
This button allows the presenter to simultaneously monitor the selected source (PGM, REC
or EXT 1), and any channel that has CUE/PFL selected. The selected source is routed in mono
to the left ear and the CUE/PFL channels are routed in mono to the right ear. This button can
only be selected if the presenter AUTO CUE/PFL button is selected and it illuminates amber
when selected.
PRESENTER Headphones
This stereo 6.35mm (¼”) socket is the feed to the presenter headphones. It is wired in
parallel with the presenter headphone connector on the rear panel of the mixer.
Guest AUTO CUE/PFL Button
When this button is selected, the normal output fed to the guest’s headphones will be
replaced if one or more input channels have CUE/PFL selected. The channels with CUE/PFL
selected will be mixed and fed to this output without having to have the fader open. This
button illuminates green when selected.
Guest TALKBACK Button
This button allows a presenter using a microphone on channel 1 to communicate with
the guest via the guest headphones. When the button is selected, the microphone signal
on channel 1 is routed to the guest headphones without the need to select CUE PFL or
open the fader on channel 1. This button is illuminated red to indicate that TALKBACK is
active, and it has a momentary and latched action; if the button is held down, TALKBACK is
cancelled when released.
GUEST Headphones
This stereo 6.35mm (¼”) socket is the feed to the guest headphones. It is wired in parallel
with the guest headphone connector on the rear panel of the mixer.
