22
S0 User Handbook
CO N F I G U R AT I O N O P T I O N S
C
ONFIGUR
A
TION OPTIONS
3
Mode 1
Cleanfeed is muted when CUE/PFL TALKBACK is active (default).
Mode 2
Cleanfeed level is reduced when CUE/PFL TALKBACK is active.
USB Audio Input CUE/PFL Mode. This is used to automatically route the USB Audio input
to the CUE/PFL bus allowing it to be monitored on the Monitor, Presenter and Guest
Headphone outputs. It is set using the Monitor AUTO CUE/PFL button.
Mode 1
The USB Audio input is automatically routed to the CUE/PFL bus as well as
being available on channels 5-8 (default).
Mode 2
The USB Audio input is not routed to the CUE/PFL bus.
Press the guest talkback button to go to page 2.
Page 2 – PGM and REC Button Modes (LED on PPM Scale 2)
PGM Button Modes are set using the PGM buttons on channels 1-9 and can be activated on
a per channel basis.
Mode 1
PGM is selectable (default).
Mode 2
PGM is always on, the button is disabled.
Mode 3
PGM is always off, the button is disabled.
REC Button Modes are set using the REC buttons on channels 1-9 and can be activated on a
per channel basis.
Mode 1
REC is selectable (default).
Mode 2
REC is always on, the button is disabled.
Mode 3
REC is always off, the button is disabled.
Page 3 – PFL Modes (LED on PPM Scale 3)
CUE/PFL Automatic Cancel Mode is set using the CUE/PFL buttons on channels 1-9 and can
be activated on a per channel basis.
Mode 1
CUE/PFL is automatically cancelled when the fader is opened (default).
Mode 2
CUE/PFL is not automatically cancelled when the fader is opened.
AUTO CUE/PFL Button Modes are set using the Monitor, Presenter and Guest AUTO CUE/PFL
buttons.
Mode 1
AUTO CUE/PFL is selectable (default).
Mode 2
AUTO CUE/PFL is always on, the button is disabled.
Mode 3
AUTO CUE/PFL is always off, the button is disabled.
