20
S0 User Handbook
CO N F I G U R AT I O N O P T I O N S
C
ONFIGUR
A
TION OPTIONS
3
Configuration Options
The S0 has a range of configuration options that allow different aspects of the mixer’s
operation to be customised. This can be done using the Sonifex SCi software that runs on a
PC, or through a dedicated setup mode on the mixer itself.
Modifying the Configuration Options Using Setup Mode
The setup mode allows the configuration options to be modified directly, without the
need to connect the S0 to a PC. The configuration settings are presented in pages, with the
current page displayed on the PPM scale on the LED meters display. To change a setting, first
select the relevant page, then using the details in the table below, press the relevant button
to select the required option setting. The buttons used to select the settings will continually
øBTIBOVNCFSPGUJNFTUPJOEJDBUFUIFDVSSFOUTFUUJOH'PSFYBNQMFGPSBTFUUJOHXJUI
NPEFTFMFDUFEBCVUUPOXPVMESFQFBUFEMZøBTIUJNFTXJUIBTIPSUQBVTFCFUXFFOFBDI
TFRVFODFPGøBTIFT
To Enter Setup Mode:
1.
Ensure all faders are closed.
2.
Press and hold the Monitor, Presenter and Guest AUTO CUE/PFL buttons.
3.
Press the Monitor PGM button 5 times within 2 seconds.
4.
A single sweep on the LED meters indicates that setup mode has been entered and
the buttons can be released.
To change the current page, press the Guest TALKBACK button. The LED meters display will
indicate the new page on the PPM scale.
To Exit Setup Mode:
1.
Press and hold the Guest TALKBACK button for 2 seconds.
2.
A dual sweep on the LED meters indicates return to normal operation and the button
can be released.
To return all configuration options to the default settings:
1.
Remove power from the unit.
2.
Ensure all faders are closed.
3.
Press and hold the Monitor REC, Monitor AUTO CUE/PFL, Presenter AUTO CUE/PFL and
Guest AUTO CUE/PFL buttons.
4.
Apply power to the unit. A single sweep on the LED meters indicates that the
configuration options are being returned to defaults. The buttons can be released.
5.
A dual sweep on the LED meters indicates return to normal operation.
