Sonel PAT-800, Operating Manual

Page: 43 / 60

OPERATING MANUAL PAT-800/805 version 1.09 41
Press START to start the measurement.
Notes:
- Readiness for next measurement is obtained automatically, but the individual measurements should
be initiated by pressing
START , as in single measurements.
- The duration of the measurement may be reduced by pressing STOP/ESC . The result remains as at
the time of stopping the measurement and the meter turns into standby mode until the next
measurement. Double pressing of
STOP/ESC interrupts the cycle of automatic measurement and all
the previous results are lost.
- If the result of one of the tests is improper (
), you may record it (finish the autotest by pressing
ENTER and consider the tested device as faulty) or press START to repeat this test (e.g. when
improper result was caused by an error in connections).