68
2-9. Media Assembly
Preparation
1. Remove the bottom harness guard. (Refer to “2-2. Bottom Harness Guard”.)
2. Remove the outside panel assembly. (Refer to “2-3. Outside Panel Assembly”.)
3. Remove the inside panel assembly. (Refer to “2-4. Inside Panel Assembly”.)
4. Remove the DC fan. (Refer to “2-8. DC Fan”.)
Procedure
1. Disconnect the fine-wire coaxial cable from the connector (CN7401) on the DPR-394 board.
2. Disconnect the fine-wire coaxial cable from the connector (CN0103) on the DIF-278 board.
3. Disconnect the flexible flat cable from the connector (CN0104) on the DIF-278 board.
4. Remove the nine precision screws, and then remove the media assembly in the direction of the arrow.
5. Install the removed parts by reversing the steps of removal.
CN7401
Fine-wire coaxial cable
DPR-394 board
Precision screws
(P2 x 4)
DIF-278 board
Fine-wire coaxial cable
Media assembly
Flexible flat cable
CN0103
CN0104
